Render Cleaning Dos and Don'ts: Common Mistakes to Avoid

Render Cleaning Dos and Don’ts: Common Mistakes to Avoid

27th June 2023

Welcome to Just Clean Property Care’s informative blog on render cleaning. In this post, we’ll go over the dos and don’ts of render cleaning, including common mistakes to avoid. Whether you’re a homeowner or property manager, this guide will help you maintain your building’s exterior appearance while ensuring safety and longevity for your investment.

What is Render Cleaning?

Render cleaning is the process of removing grubby stains, discolouration and other unsightly marks from the exterior walls of a building. It involves using a combination of water, detergent or bleach mix and pressure to wash away dirt, mould, lichen and algae. Softwashing is another method that uses less pressure with nozzles to apply detergents or biocides that kill off fungus spores and mildew.

It’s important to note that not all render can be cleaned in the same way – some types require special treatments or equipment like brushes or sponges to avoid damage. Additionally, it’s crucial to get the ratios right when mixing chemicals as too much bleach can cause irreparable harm. A professional render cleaning company will understand these nuances and have experience dealing with various kinds of buildings and surfaces while adhering to industry standards for safety and effectiveness.

Dos of Render Cleaning

When it comes to render cleaning, there are several dos that you should keep in mind. Firstly, do use the right cleaning solution for your specific type of render. Different types of renders require different solutions, so make sure to choose the correct one to avoid discolouration or damage. Secondly, always test a small area before cleaning the entire surface. This will help you determine if the product and method you have chosen is effective without causing harm. And finally, do hire a professional if you’re not confident in your ability to clean it yourself – this can save time and money by avoiding any costly mistakes.

Mixing bleach and water may seem like an easy DIY solution for removing grubby stains from your building’s exterior but be warned as this could cause serious damage over time due to its corrosive nature. Instead opt for softwashing with nozzles on low-pressure setting using detergents that are safe for both people and environment which is gentle yet delivers satisfying results without damaging surfaces long term especially when dealing with stubborn algae lichen fungus mildew stains . Consider using brushes or sponges where necessary instead of relying solely on pressure washers which can also cause similar damages if used excessively or incorrectly; remember that every surface requires different treatment plans based off its unique properties hence why consulting our guide or hiring professionals might be best option available!

Don’ts of Render Cleaning

  • Avoid using high-pressure washing as it can cause damage to the render surface. Instead, use softwashing or a low-pressure nozzle.
  • Don’t let cleaning solutions sit on the surface for too long as they can cause discoloration or other damage. Rinse thoroughly with water after applying any detergent mix.
  • Don’t attempt to clean heavily soiled areas without proper protective gear such as gloves and goggles.

When it comes to rendering cleaning, there are certain things you should avoid doing in order to prevent further damage. Using high-pressure nozzles and letting cleaning solutions sit on the surface for too long are examples of what not to do. Additionally, don’t forget about your safety when attempting heavy-duty work.

Remember these tips when taking on a render cleaning project:

  • Use softwashing instead of high pressure
  • Always rinse thoroughly with water
  • Wear protective gear like gloves and goggles

Common Mistakes to Avoid

  • Using abrasive tools or chemicals that could scratch or otherwise damage the render surface
  • Neglecting regular maintenance, which could lead to more costly repairs down the road
  • Assuming all types of renders are cleaned in the same way without consulting an expert first

When it comes to rendering cleaning, there are some common mistakes you should avoid. Firstly, don’t use abrasive tools like brushes that may scratch and ruin your render’s smooth finish. Secondly, keep up with regular maintenance so you can prevent any discolouration caused by algae, fungus or mildew. Lastly, not all renders are cleaned using the same methods – always consult an expert before attempting any cleaning.

It’s easy for grubby stains on a building exterior to go unnoticed until they become too unsightly. However make sure when choosing a method of cleaning it is safe for your specific type of render and will not cause further damage.

How to Choose a Render Cleaning Company

When choosing a render cleaning company in Bury, it’s important to check their experience and expertise with different types of rendering materials. Ensure they have the appropriate knowledge and equipment to deal with any issues such as algae, lichen, mildew or other discolouration stains that may be present on your building. You should also ask for references from previous customers and check reviews online to get an idea of their level of performance.

Inquire about how the company approaches safety measures when carrying out cleaning tasks. Do they have insurance coverage in case accidents happen? Additionally, it’s essential to find out if they use environmentally friendly practices or harsh chemicals like bleach or detergent in their cleaning process. A trustworthy render cleaning company will offer softwashing services using a mix of water and gentle detergents applied through nozzles at low pressure rather than high-pressure washing techniques which can damage the surface material.