What to Use to Clean the Driveway
23rd May 2022
Coke
When trying to clean an oil stain on your driveway, you can use Coca Cola to do the trick. Coca Cola contains acids that are very effective at removing grease and oil stains. It is safe to use on concrete because of the acid content, and it can even remove oil from your car. After applying the mixture to the stain, simply rinse it off with water. You’ll be surprised by the results! Here are some other ways to use Coke to clean a driveway.
The first way to use coke to clean a driveway is to scrub with it. This works well for removing oil stains on asphalt. It can also be applied to oil stains with a hard brush. Once the mixture has been applied to the stain, you should wait for it to soak for about six hours before wiping it away. Then, you can use a hose to rinse away the coke residue.
Trisodium phosphate
To clean your driveway with a mixture of TSP and water, prepare a bucket full of the solution and use a stiff bristled broom to scrub the surface. Then, rinse it off with a pressure washer or garden hose. Trisodium phosphate (TSP) is a heavy-duty cleaning solution that can break up oils and dissolve similar solvents. The solution can be used to clean your driveway and is strong enough to remove even deep stains.
If you’re concerned about the environmental impact of TSP, you can use a non-toxic solution that contains borax. Borax contains no harmful chemicals and is cheap and easy to use. Borax can also kill fungi, remove dirt and grease from porous surfaces. You can also substitute TSP with borax to clean your driveway. But before you apply it, make sure to wear safety glasses or goggles.
Enzyme cleaners
Many people are unaware of the amazing properties of enzyme cleaners, which break down fats and proteins. These natural cleaning agents are nontoxic and do not damage fabric. They are safe for children and pets to use. They can be used on various types of floors, including marble, linoleum, wood, tile, and cork. You can dilute the formula to use it on carpets, rugs, and floors.
Oil stains on concrete can affect the appearance of your home. Depending on the severity of the stain, you can use strong chemicals, such as acetone and lacquer thinner. However, if you have an older concrete driveway, you can use a natural, eco-friendly product such as enzyme cleaners. These cleaners are effective even on stubborn stains and come in both wet and dry formulas. Because you don’t need to scrub the driveway, you can apply a generous layer and leave it for a few hours.
Bleach
Despite its obvious advantages, using bleach to clean driveway can be harmful to pressure washers. If you are planning to use a power washer to clean your driveway, you can use Simple Green Oxy Solve Concrete and Driveway Cleaner. It works well on concrete and helps you get rid of dirt, oil, and other discolorations. In addition, it is non-corrosive and non-degradable, which means it is safe for pressure washers as well.
To clean your driveway with bleach, first broom your driveway with a solution of one part bleach and five parts water. Then, use a small scrub brush to clean the moss and tight corners. After the treatment, you need to rinse the entire area thoroughly with fresh water. Bleach is a powerful cleaning agent, but be sure to follow directions on the label carefully to prevent any harmful effects. To clean driveways made of concrete, you can mix one part bleach with four gallons of water. Then, you can scuff the concrete with a broom and a bleach solution.