Guide for Home Roof Cleaning
24th November 2021
Safety
When it comes to roof cleaning in Golborne, safety should always take first. When cleaning your roof, you can use safety gear. Make sure the day you choose to clean is gloomy and chilly. To avoid sliding and falling from your roof, you must wear slip-resistant shoes. It’s also a good idea to use safety goggles to protect your eyes from debris.
You’ll need thick gloves because you’ll be working with chemicals like sodium hypochlorite. You should also wear long pants and long-sleeved shirts to protect your body from these harmful substances. If you have a sloped roof, you can also tie yourself to your chimney while cleaning. If you have a sloped roof, you can also tie yourself to your chimney while cleaning. Plus, you may always enlist the assistance of a friend to assist you with the tools and the ladder.
Getting Rid of Debris
Once you’ve climbed to the top of the roof, you’ll need to clear out all of the debris. This must be done before applying the cleaning solution. To clear all of the undesired material, use a leaf blower or a broom. You may clear the stains on your roof in quite this way. While you’re doing it, be sure to cover the bushes and plants as well.
Cleaning Solution Preparation
Because it’s not just water and soap, you may clean your asphalt shingles in a variety of ways. However, certain chemicals, such as sodium hypochlorite, will be used. It aids in the removal of dirt and algae stains from your roof. If you want your roof to last as long as possible, avoid using strong chemicals. You should always use safe and recommended products for your asphalt shingles.
Fill the garden sprayer halfway with your solution
You’ll need a gallon of water, a chemical solution, and a quarter of a cup of chlorine bleach to get good results. Begin mixing them and placing them in the container. You may also use a garden hose with a pump to perform the job. You’ll be OK as long as your sprayer has a modest pressure. Your solution, on the other hand, should never be used in a pressure washer. Your asphalt shingles will be damaged as a result of your actions.
Applying Your Cleaning Solution
Now is the time to start spraying your shingles, especially those that have a lot of algae on them. Try to get rid of all the black streaks while you’re spraying. Depending on the condition of your roof shingles, you’ll need a different quantity of cleaning solutions. After spraying, let the solution remain for at least 15-20 minutes. After you’ve completed the operation, you may rinse your roof. You may complete the task with a garden hose. Make certain that all of the bleach has been removed.
It’s usual to see some tenacious algae and black streaks on your roof after cleaning. Scrub it away till it disappears. You can loosen and remove them with a broom or a medium-sized bristles brush. To avoid scratching your roof, make sure you don’t apply too much pressure.