A Step-by-Step Guide On Cleaning Asphalt Shingles

15th July 2021

If you are a beginner, then roof cleaning might be a little tricky for you. The treatment of your roof will depend on its condition. Some roofs have minor problems, but some are just badly affected. The key here is to clean your roof without causing any collateral damage in the process. Your landscape should also be protected in the process. If you plan to clean the roof by yourself instead of seeking professional roof cleaning services, this guide is for you.

Protecting Your Plants & Shrubs

Before you start the cleaning process, the first and foremost thing that you should do is to protect your vegetation. Ensure that your vegetation is fully pre-soaked using water. It will help in saturating every cell of the plants and shrubs around you. Your plants won’t end up absorbing the chemicals once their cells are saturated. But ensure that you still post rinse to garner additional insurance and protection.

Mixing Cleaning Chemicals

Now you need to start mixing your cleaning chemicals and put them inside the garden sprayer. A 50/50 mix would be sufficient for your asphalt shingle roof. It will make your chemical adequately hot for obtaining a satisfactory outcome.

Begin From The Top

You need to apply and coat the cleaning chemical from the top and work your way towards the bottom. Some people like tossing green dish liquid of over ¼ cup in their mixture. It is for allowing a slower chemical to run down your roof. It helps the active ingredient to remain wet for long, allowing it to have sufficient time for killing the algae.

The Lesser Chemicals, The Better

This particular phrase is like the universal law and also applies to your roof. You should always avoid using excess chemicals. The last thing you would want is your roof overflowing with chemicals. It won’t just destroy your roof, but your entire property will end up smelling chemicals. So, you should use a garden sprayer to prevent the overflowing of the chemicals. The garden sprayer will distribute adequate portions.

Double Treating Affected Areas

Sometimes the algae may not disappear or turn white in five minutes after applying the first coating. Here, you need to reapply your cleaning solution in the same manner. Some overgrown and fire moss gives you a hard time due to its hearty nature. Keep spraying more chemicals until it starts to turn white. You can even start spraying a hotter chemical mix to kill the containment.

Re-Soaking Plants

Some of your plants may have gotten a coating or mist of the cleaning mixture. Many young cleaners tend to skip this important step, so you need to follow it. You will end up damaging your landscape if you skip this particular step. Re-soaking and also rinsing your vegetation will prolong its lifespan. You should prioritise this step, especially if you have overspray on some of your plants and shrubs.

Step On Down

Now you just have to sit back and watch. Proceed to come down from the ladder safely. After some weeks, you can come and back and see the results. If you need to reapply the chemicals, then you can do so again. But we are positive that everything would have worked by now if you follow these steps. Ensure that you get the right tools and chemicals for the job. Safety should always be your number one priority for roof cleaning in Wilmslow.